The Pall PCM400 is specifically developed as a portable diagnostic monitoring device that provides an assessment of system fluid cleanliness.

Features

• Proven mesh blockage technology
• Results not affected by water or air
• Monitors dissolved water content (% saturation or PPM output for specific fluids (PCM400W only))
• High and low pressure on-line or off-line sampling
• Continuous monitoring
• 500 test memory
• ¼" BSP or test point hose connection
• PC-based trending software included
• Viscosity output in centistokes (cSt)
• Real time graphical representation

Benefits

As part of continued component cleanliness 'pass off' checks or predictive maintenance programs the PCM400 monitor quickly reports test data so that ongoing assessments can be made.

Early detection of abnormal fluid cleanliness allows for timely investigation and corrective actions to be implemented.

The PCM400 can be permanently installed to monitor critical applications (including component test facilities) or used as a portable device for routine condition monitoring of various fluid systems.

Click here if you'd like more information on this product.

Pall PCM400 Specifications

Viscosity range	1.5 - 450cSt
Test time	About 6 minutes depending on temperature stability
Operating pressure range	0 to 315Bar (4570 psi) maximum
Output data	ISO4406, SAE AS4059E Table 1 (NAS 1638) or SAE AS 4059E Table 2
Monitoring range ISO4406	-/9/7 to -/21/17
Monitoring range SAE AS4059E Table 1	1 to 10 at 6 to 14µm(c) (5 to 15µm)
Monitoring range SAE AS4059E Table 2	>6µm: 1B to 10B and >14µm: 1C to 10C
Number of tests on a fully charged battery	Nominal 35
Seals	Fluorocarbon
Fluid temperature range	10 - 80°C (50 - 170°F)
Ambient temperature	50 °C (122°F) maximum
Power supply	External mains PSU/charger 92-264Vac (50-60Hz) External 12-48VDC (cable option) Internal 19.2VDC battery
Weight	10.8Kg (22 lb)